iTutorzz

Free electronics tool

Resistor Color Code Calculator

Click the band colors to read a 4-band or 5-band resistor: its resistance, tolerance range and whether it is a standard E12 or E24 value, drawn on a resistor as you go. Or type a value like 4.7k and see which colors it has. The full color code chart is below. Free, no signup.

Resistance

4.7 kΩ
4,700 Ω

Tolerance

± 5%
4.465 kΩ to 4.935 kΩ

Standard value?

E12
in the common E12 (and E24) series

Band 1: 1st digit: Yellow (4)

Band 2: 2nd digit: Violet (7)

Band 3: multiplier: Red (× 100)

Band 4: tolerance: Gold (± 5%)

Find the bands for a value

220, 4.7k, 4k7, 1M (M means mega here)

Resistor color code chart

ColorDigitMultiplierTolerance
Black0× 1-
Brown1× 10± 1%
Red2× 100± 2%
Orange3× 1k-
Yellow4× 10k-
Green5× 100k± 0.5%
Blue6× 1M± 0.25%
Violet7× 10M± 0.1%
Gray8× 100M-
White9× 1G-
Gold-× 0.1± 5%
Silver-× 0.01± 10%
No band--± 20%

The color code at a glance

The digits run in rainbow order: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, gray 8, white 9. The multiplier band uses the same colors as a power of ten (red × 100, orange × 1,000, yellow × 10,000), plus gold (× 0.1) and silver (× 0.01). The color code is defined in the international standard IEC 60062.

Worked example

A resistor reads brown, black, orange, gold. Brown is 1 and black is 0, so the digits are 10. Orange multiplies by 1,000, giving 10,000 Ω = 10 kΩ. Gold means ± 5%, so the real value is between 9.5 kΩ and 10.5 kΩ.

Frequently asked questions

How do you read a resistor color code?+

Hold the resistor with the tolerance band (often gold or silver, set a little apart) on the right. Read the bands from the left: the first two (or three, on a 5-band resistor) are digits, the next is the multiplier, and the last is the tolerance. Yellow, violet, red, gold is 4, 7, × 100 = 4,700 Ω (4.7 kΩ) ± 5%.

What is the difference between 4-band and 5-band resistors?+

A 5-band resistor has a third digit band, so its value can have three significant figures (for example 4.99 kΩ). 5-band resistors are usually precision resistors with a tolerance of 1% or better; 4-band resistors are often 5% or 10%.

What do gold and silver mean on a resistor?+

As the last band they are tolerances: gold is ± 5% and silver is ± 10%. In the multiplier position they divide the value: gold multiplies by 0.1 and silver by 0.01, which is how resistors under 10 Ω are marked (blue, gray, gold is 6.8 Ω).

What are E12 and E24 values?+

Resistors are made in standard series of values per decade. E12 has 12 (1.0, 1.2, 1.5, 1.8, 2.2, 2.7, 3.3, 3.9, 4.7, 5.6, 6.8, 8.2, times any power of ten) and E24 has 24. That is why you can buy a 4.7 kΩ resistor but not a 5 kΩ one: the calculator tells you the nearest standard value.

What does tolerance mean?+

How far the real resistance can be from the marked value. A 1 kΩ resistor with ± 5% tolerance can measure anywhere from 950 Ω to 1,050 Ω and still be within specification.

Learning about circuits?

Ohm's law, series and parallel circuits come up in every physics course. A physics tutor can make them click one-on-one, and your first trial lesson is free.

Get confident with electricity

A 1-on-1 physics tutor connects the formulas to real circuits. Your first trial lesson is free.