Free physics lab
Circuit Lab
Build a circuit with a battery, a switch and up to four bulbs in series, in parallel, or a mix of both. Change the voltage and each resistance and watch the current flow and the bulbs glow brighter or dimmer. Every voltage, current and power is calculated with Ohm's law and shown step by step. Free, no signup.
Moving dots show conventional current (from + to −): faster dots, more current. Brighter bulbs use more power.
Total resistance
Current from the battery
Total power
| Bulb | Resistance | Voltage | Current | Power |
|---|---|---|---|---|
| Bulb 1 | 100 Ω | 1.5 V | 15 mA | 22.5 mW |
| Bulb 2 | 200 Ω | 3 V | 15 mA | 45 mW |
| Bulb 3 | 300 Ω | 4.5 V | 15 mA | 67.5 mW |
Ohm's law, step by step
- 1In series the current has one path, so the resistances add.R_{\text{total}} = R_{1} + R_{2} + R_{3} = 100 + 200 + 300 = 600\ \Omega
- 2Ohm's law gives the current from the battery.I = \frac{V}{R_{\text{total}}} = \frac{9}{600} = 15\,\mathrm{mA}
- 3The same current flows through every bulb; each takes a share of the voltage, V = IR, and the shares add up to the battery voltage.V_{1} = 1.5\,\mathrm{V},\ I_{1} = 15\,\mathrm{mA} \qquad V_{2} = 3\,\mathrm{V},\ I_{2} = 15\,\mathrm{mA} \qquad V_{3} = 4.5\,\mathrm{V},\ I_{3} = 15\,\mathrm{mA}
- 4Power is how bright a bulb shines: P = VI.P_{1} = 22.5\,\mathrm{mW} \qquad P_{2} = 45\,\mathrm{mW} \qquad P_{3} = 67.5\,\mathrm{mW}
The rules for series and parallel
In series the current is the same everywhere and the voltages add up to the battery's. In parallel the voltage is the same across every branch and the currents add up to the total.
Worked example: three bulbs in series
A 9 V battery drives bulbs of 100 Ω, 200 Ω and 300 Ω in series.
Each bulb gets : 1.5 V, 3 V and 4.5 V, which add up to 9 V. The 300 Ω bulb takes the most voltage, so in series it glows brightest. Set the lab up the same way to check.
Frequently asked questions
What is Ohm's law?+
The current through a resistor is proportional to the voltage across it: , where V is voltage in volts, I is current in amps and R is resistance in ohms. Rearranged, and .
What is the difference between series and parallel circuits?+
In series, components share one path: the same current flows through all of them, their voltages add up to the battery voltage, and resistances add. In parallel, each component has its own path: each gets the full battery voltage, the currents add up, and the total resistance is less than the smallest one.
Why are bulbs in parallel brighter than bulbs in series?+
In parallel each bulb gets the full battery voltage, so it uses as much power as it would on its own. In series the voltage is shared, so each bulb gets less voltage and less current, and power drops for both reasons. Try it: switch between series and parallel and watch the glow.
What happens if one bulb breaks?+
In series the single path is broken, so every bulb goes out (like opening the switch). In parallel the other branches still form complete loops, so the other bulbs stay lit. That is why homes are wired in parallel.
Is a light bulb really a fixed resistor?+
Not quite: a filament's resistance rises a lot as it heats up. The lab treats each bulb as a fixed resistor so the numbers follow Ohm's law exactly, which is how school problems are set up.
Circuits on the next test?
Series and parallel problems are easier when you can picture the current. A physics tutor can work through them with you one-on-one, and your first trial lesson is free.
Make electricity make sense
A 1-on-1 physics tutor helps you see what the current is doing, not just plug numbers in. Your first trial lesson is free.