Free science tool
Science Unit Converter
Convert between metric and US units for length, mass, volume, temperature, time, speed, area, density, pressure, energy and force, and see the dimensional analysis written out the way chemistry and physics teachers want it: the conversion factor, the units canceling, and the answer rounded to the right significant figures if you like. Free, no signup.
e.g. 5, 0.0042 or 6.02e23
kilometer to mile
Dimensional analysis
- 1Write the number with its unit, then multiply by a conversion factor: a fraction equal to 1, with the unit you want on top and the unit you have on the bottom.
- 2The old unit cancels, leaving the unit you want.5\ \cancel{\mathrm{km}} \times \frac{1\ \mathrm{mi}}{1.609344\ \cancel{\mathrm{km}}} = 3.10686\ \mathrm{mi}
5 km in every length unit
- kilometer5\ \mathrm{km}
- meter5{,}000\ \mathrm{m}
- centimeter500{,}000\ \mathrm{cm}
- millimeter5 \times 10^{6}\ \mathrm{mm}
- micrometer5 \times 10^{9}\ \mu\mathrm{m}
- nanometer5 \times 10^{12}\ \mathrm{nm}
- picometer5 \times 10^{15}\ \mathrm{pm}
- mile3.10686\ \mathrm{mi}
- yard5{,}468.07\ \mathrm{yd}
- foot16{,}404.2\ \mathrm{ft}
- inch196{,}850\ \mathrm{in}
Dimensional analysis, step by step
- Write the number you have with its unit.
- Multiply by a conversion factor with the unit you want on top and the unit you have on the bottom.
- Cancel the units that appear on both top and bottom, then do the arithmetic.
- Check that only the unit you want is left. If it isn't, a factor is upside down.
Two factors in a row turn a speed in km/h into m/s:
Metric prefixes to know
Kilo- means a thousand (), centi- a hundredth (), milli- a thousandth (), micro- a millionth () and nano- a billionth (). So 1 km = 1000 m, 1 m = 100 cm, and 1 g = 1000 mg.
Exact definitions behind the numbers
US units are defined from metric ones: 1 inch is exactly 2.54 cm, 1 pound is exactly 0.45359237 kg, and the US gallon is exactly 231 cubic inches. In science, 1 standard atmosphere is exactly 101,325 Pa (760 mmHg), 1 thermochemical calorie is exactly 4.184 J, and 1 electronvolt is exactly J. The converter uses these exact values.
Frequently asked questions
What is dimensional analysis?+
A way to convert units by multiplying by conversion factors, fractions that equal 1 because the top and bottom are the same amount in different units (like ). Put the unit you want on top and the unit you have on the bottom, and the old unit cancels. Chemistry and physics teachers ask for it because the units show you whether the setup is right.
How do you convert Fahrenheit to Celsius?+
Subtract 32, then multiply by 5/9: . Body temperature, 98.6 °F, is °C. To go back, multiply by 9/5 and add 32. For kelvin, add 273.15 to the Celsius temperature.
Do conversion factors count for significant figures?+
Not when they are exact by definition, like 1 in = 2.54 cm, 1 km = 1000 m or 1 atm = 760 mmHg. Exact numbers have unlimited significant figures, so the answer keeps the significant figures of your measurement. Tick the significant figures box in the converter to round that way.
Is a milliliter the same as a cubic centimeter?+
Yes. 1 mL = 1 cm³ exactly, and 1 L = 1000 cm³ = 1 dm³. That is why a density in g/mL is the same number as in g/cm³.
Which gallon does the converter use?+
The US liquid gallon, 231 cubic inches = 3.785411784 L, along with US quarts, pints, cups and fluid ounces. The UK (imperial) gallon is larger, 4.54609 L.
Unit problems in chemistry or physics?
Most mistakes in science problems are unit mistakes. A tutor can make dimensional analysis automatic, one-on-one, and your first trial lesson is free.
Never lose points on units again
A 1-on-1 science tutor builds the habits that make every calculation reliable. Your first trial lesson is free.