iTutorzz

Free chemistry lab

Gas Laws Lab

Watch gas particles move in a piston: hold the temperature, pressure or volume constant and change the others to see Boyle's, Charles's and Gay-Lussac's laws happen, with a live graph. Then solve gas law problems, including the combined gas law and PV = nRT, with every step shown. Free, no signup.

1 atm

Boyle's law

Temperature is held constant. Squeeze the gas into less volume and the particles hit the walls more often, so the pressure rises: pressure and volume are inversely proportional.

Pressure

1 atm
101 kPa

Volume

22.4 L

Temperature

273 K
0 °C

Pressure (atm) against volume (l)

00.511.522.501020304050Volume (L)Pressure (atm)

Dashed line: the law's prediction. Dots: the states you visited.

Worked example: Boyle's law

A gas takes up 12 L at 1.0 atm. What is its volume at 3.0 atm, at the same temperature?

V2\displaystyle V_{2}
=P1V1P2=1.0×123.0\displaystyle = \frac{P_{1} V_{1}}{P_{2}} = \frac{1.0 \times 12}{3.0}
=4.0 L\displaystyle = 4.0\,\text{L}

Three times the pressure, one third of the volume: that is what "inversely proportional" means.

Worked example: Charles's law

A balloon holds 2.0 L at 25 °C. What is its volume at 75 °C, at constant pressure? Convert to kelvin first:

T1\displaystyle T_{1}
=298.15 K,T2=348.15 K\displaystyle = 298.15\ \mathrm{K}, \quad T_{2} = 348.15\ \mathrm{K}
V2\displaystyle V_{2}
=V1T2T1=2.0×348.15298.15≈2.3 L\displaystyle = \frac{V_{1} T_{2}}{T_{1}} = \frac{2.0 \times 348.15}{298.15} \approx 2.3\,\text{L}

Using °C would give 2.0×7525=6.0 L2.0 \times \frac{75}{25} = 6.0\,\text{L}, which is far too big: always use kelvin.

Why the laws work: particles

Pressure comes from particles hitting the container walls. Less volume means more hits per second (Boyle). Higher temperature means faster particles that hit harder and more often, which either raises the pressure (Gay-Lussac) or pushes the piston out (Charles). The simulation's particles speed up with the square root of the kelvin temperature, as the kinetic theory of gases predicts.

Frequently asked questions

What are the gas laws?+

Boyle's law (at constant temperature, P1V1=P2V2\mathrm{P_1V_1} = \mathrm{P_2V_2}), Charles's law (at constant pressure, V1T1=V2T2\frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}) and Gay-Lussac's law (at constant volume, P1T1=P2T2\frac{P_{1}}{T_{1}} = \frac{P_{2}}{T_{2}}). Together they make the combined gas law, and adding the amount of gas gives the ideal gas law, PV=nRTPV = \text{nRT}.

Why must temperature be in kelvin?+

The gas laws compare temperatures as ratios, and a ratio only makes sense on a scale that starts at absolute zero. Doubling 10 °C to 20 °C does not double a gas's volume; doubling 283 K to 566 K does. Convert with K=∘C+273.15K = ^\circ C + 273.15.

What is the value of R in PV = nRT?+

With pressure in atm and volume in liters, R=0.08206R = 0.08206 L·atm/(mol·K). In SI units (pascals and cubic meters, or joules), R=8.314R = 8.314 J/(mol·K). Use the R that matches your units.

What volume does one mole of gas take up?+

At 0 °C and 1 atm, one mole of an ideal gas takes up about 22.4 L. You can check it with the solver: V=nRTP=1×0.08206×273.151≈22.4V = \frac{\text{nRT}}{P} = \frac{1 \times 0.08206 \times 273.15}{1} \approx 22.4 L.

When do real gases not follow the ideal gas law?+

At high pressures and low temperatures, when the molecules are close together. Then the volume of the molecules themselves and the attractions between them matter, and real gases deviate from PV=nRTPV = \text{nRT}. At everyday conditions most gases behave very nearly ideally.

Gas laws on your next chemistry test?

Gas law problems are easy points once you know which law to use and keep your units straight. A chemistry tutor can drill that with you one-on-one; your first trial lesson is free.

Make chemistry problems routine

A 1-on-1 chemistry tutor shows you how to pick the right equation every time. Your first trial lesson is free.